This extremely fast, and powerful app contains features useful to Network Administrators, IT Professionals, and non-professionals, alike. LANScan is designed to give the user a complete understanding of all the devices connected to a local network. Secure your network by identifying all of your devices.Easily see every device connected to your current Wi-Fi network.I did as you described, found the NAS and now everything works fine.LANScan is the powerful, easy-to-use network scanner for everybody. This was the clue! YES! :-) Because it has happened from time to time that my Mac could not connect automatically to the NAS, I had assigned a static IP years ago (and forgotten that). I PINGed all IPs from 192.168.1.1 to 192.168.1.255, found all connected devices - except for the NAS. LanScan.app lists all devices connected to a Mac :-) To do this, you'll need to direct connect your computer to the NS4300 (plug the ethernet cable from your computer directly into the NS4300), then change your computer's IP from DHCP to 192.168.0.10, direct your browser to 192.168.0.185, login to the NS4300 and change the network IP from 192.168.0.185 to DHCP, then shut it down and reconnect it to your router, it should then acquire an IP in the correct subnet. So you need to change the NS4300 IP to the 192.168.1.X range manually. It just occurred to me, if the old IP was 192.168.0.185, it must be a static IP unless you have 185 network devices on your router. You can ping the IPs, say from 192.168.1.1 to 192.168.1.10 and see which are active. So if you only have a few devices on the net just work up from 192.168.1.1 and you should find it shortly. There does not seem any convienient solution for Mojave, and they no longer include Bonjour in macOS.īut routers tend to assign IPs from the bottom up, the router IP is X.X.1.1, the next DHCP request will get X.X.1.2, then X.X.1.3, and so forth. Most routers have a page where you can see which devices are connected, you should be able to find out from your router.Īnd if you have any windows machines on the net you can use Advanced IP Scanner to find all devices on the network. What can I do if I don't want to go through possible 250 IP addresses (and maybe none of them works for some reason)? So I exchanged the 0 against 1 and tried SMB://192.168.1.185/, but this does not work, either.Īccording to your message I tried both versions in the browser (192.168.0.1 and 192.168.1.1), but none brought up the GUI. In earlier times, when no automatical mounting took place, I could connect via SMB://192.168.0.185/. Some days ago I started the NAS and expected it to mount automatically as before, but it didn't. Continuing using High Sierra, everything continued to work fine: When I start up the NAS, it automatically was mounted by the Finder (as described above). This new router has the IP address 192.168.1.1. Some months ago I added another router and connected the NAS via the new router (Linksys Velop). So there was no need to make use of the NAS' IP address for quite a time. If not immediately automatic, then usually after a restart from NAS and Mac. That time I was using Mac OS High Sierra. Usually the Finder automatically mounted the NAS. With this address I could reach the management GUI and connect via SMB. With that router the NAS repeatedly was automatically assigned the IP address 192.168.0.185. That router had the IP address 192.168.0.1. I have been using another router before (from Unitymedia). I am only using the NAS every few weeks to back up important files. Can you can point your browser to 192.168.1.185 and see if you get the management GUI?
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |